Designed for #4 and #5 Rebar

3″ Rebar Chair

Discover the Best 3″ Rebar Chair for Your Construction Needs

The Hercules 3″ Rebar Chair #912 is perfect for commercial concrete applications that require 6″ to 8″ concrete slabs. Designed for #4 and #5 rebar, the #912 has a 3″ clearance from the ground to the bottom bar. Simply snap the rebar into place. No wire tying is necessary. Designed for maximum concrete flow in and around the chair, the #912 is your solution to help you “get the job done right!”

All Products

Save Time

Over traditional rebar tying

Maximum Concrete Flow

For an easier installation

High Strength

Easily move throughout your project

3″ Rebar Chair estimator







Chairs Required

Total Square Footage:

0

sq. feet

(If placed at every crossing):

Boxes Required (50 chairs per box):

Boxes Required (100 chairs per box):

3″ Rebar chair Placement & Usage

For our 3″ rebar chairs, we recommend placing a chair at every rebar crossing. Simply snap the bottom piece of the reinforcement into the bottom clip, then snap the top piece of reinforcement into the top clip, and you are finished. No wire tying needed. Our rebar chairs ensure the reinforcement stays in the right place before, during, and after the concrete pour.

Buy Rebar Chairs

Strength. Quality. SOLUTION.

Get your 3″ Hercules Rebar Chairs and accessories easily through our nationwide retail stores, major online retailers, or directly on Amazon. For a quick guide on where to find these products, just click “Where To Buy” to see all your purchasing options.

3″ Rebar Chair

Frequently Asked Questions.

Do our chairs get buried in the concrete or get taken out during the pour?

Buried

Can our chairs be used for any reinforcement spacing?

Yes

What is the overall height of the chair?
4-3/8”
What reinforcement size is this chair designed for?
#4’s and #5’s
Is a chair required at every reinforcement crossing?

We recommend placing a chair at every crossing.

Can our chairs be used in vertical, concrete walls?
Yes
Does the bottom piece of reinforcement need to be slid in instead of snapped in?

No, both pieces of reinforcements can be snapped.
in.